High Performance Hydraulic Vibratory Tamper

• Customization: Available
• After-sales Service: 24 Hours Online Service
• Type: Rammer Compactor
• Model NO.: MV06T/MV13T/MV20T
• Working Method: Vibration
• Axle: Uniaxial Monowheel
• Grinding Wheel Type: Tire Grind
• Engine Type: Petrol Engine
• Condition: New
• Working Oil(L/Min): 20-80
• Working Pressure(MPa): 13-15
• Weight(Kg): 300-960
• Origin: China

Product Description

Product Description

 

Model number	MV06T	MV13T	MV20T
Working oil(L/min)	20-40	40-60	60-80
Vibrating plate(mm)	700*480	844*850	1120*895
Working pressure(mpa)	13-15	13-15	13-15
Dimension(mm)	800*480*685	1000*850*838	1313*895*992
Weight(kg)	300	570	960

The hydraulic vibratory rammer is mainly used with the excavator, installed in the original bucket position at the front end of the bucket rod, and driven and controlled by the hydraulic power of the excavator (installation and control with the hydraulic crushing hammer). Simple structure, easy to use and maintain. Suitable for a variety of terrain and a variety of operating methods. Can complete the plane tamping. Ramp tamping, step tamping, trench tamping and other complex foundation tamping treatment.
In highway construction, the tamping engineering of pipe ditch and narrow pavement often occurs. Large, medium and small rollers can not backfill compaction in narrow areas and small and medium-sized earth work. If the construction work uses micro-vibration tamping machinery or vibrating plate tamping, its volume is relatively large and heavy. In the very narrow area and the compaction of the canal bottom, the practical operation is very difficult, even impossible to carry out engineering. The excavator provides the power system for the hydraulic vibration tamper, actually operates the excavator arm, and makes the excavator vibration tamper close to the narrow area and the bottom of the canal that must be firm, which can actually facilitate the actual operation of the pressure.