| Customization: | Available |
|---|---|
| Type: | Semi-Trailer |
| Load Capacity: | 40t |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Descriptions | Technical Specifications |
| Deck L*W*H(mm) | 15000*2520*1500 |
| Front wall Height (mm) | 1520 |
| Payload Capacity (kg) | 30,000 (Approximately) |
| Gross Vehicle Weight (kg) | 40,000 (Maximum) |
| Chassis frame |
Welded IPE 480 main Beam ,140mm width,the top flange 14mm bottom flange 16mm web 6mm thickness,side,front and rear beam is UPN 160*65mm,Cross member is IPE80*46mm.Main steel material Q345,The main beam,side beam split joint is not allow . |
| All structure, chassis and suspension should be guaranteed for five (1) years against cracked. |
|
| Axle and Suspension | Heavy duty BPW brand made in China. |
| 3 X 12T - Air suspension | |
| Every air bellow shall be provided with emergency shut-off valve to manually close the air supply of individual bellow in case of leak | |
| 90 mm air bellows shoe should be installed on all air bellows. | |
| Front axle shall have lifting device,BPW brand,made in China | |
| Each axle shall have 2 shock absorbers | |
| To be fitted with hub-odometer,the second axle,right side | |
| Drum brake | |
| Brakes System | Air brake, dual circuit |
| Linkage-free parking brakes | |
| Main brake valves and ABS are WABCO brand,Gladhand valve,Connector,hose and accessories are Chinese brand | |
| The brake system shall have ABS control (Two axles2&3, indicating lights and fault indicator must be provided.) | |
| All brake lines shall be protected with high quality insulation hoses and attached to the chassis with insulated metallic clamp | |
| Heavy duty air pressure gauges should be installed near (Service) palm coupling | |
| Every union fitting shall be applied with loctite to ensure connection and prevent air leaks. | |
| Electrical System | 24 Vdc |
| Cables & Harnesses |
Electrical cable wirings shall be appropriately harnessed and protected with an appropriate size of protective insulation. |
| Cable harness shall be properly laid out and held with appropriate sizes of insulated metallic clamps | |
| Trailer Exterior Lighting (Sizes & colors of exterior light shall conform with SASO and international standards) | Side marker lights - Total of 14 side marker lights, 7 on each side of the trailer, symmetrically placed to cover the total length of the trailer |
| Taillight clusters - Two sets on each side of the trailer's rear end. Each cluster includes; reflector red in color and the dimensions shall be 10cm x 12 cm) parking light, brake light, direction light, & reverse light and horn. . |
|
| Rear plate lights - 2 pieces | |
| Trailer Electric Coupling Connector |
all weather 7-pin connector, with flexible spiral conduit or multicore cableinsulation |
| King pin | 2" Jost King pin mounted to the front reinforced subframe . |
| Support legs (Landing gear) |
JOST brand, heavy duty telescopic type dual speed support legs. Suitable bracing with crank mechanism should be added to support the landing gear JOST |
| Suspension ride height on 5th wheel (mm) |
The mounting of top plate for each air bellow shall be measured in such a way that the floor height shall be level. Taking into consideration that the fifth wheel height is 1,400 mm |
| Tires and Rims |
Single tire Super 385/65R (11.75x22.5) steel disc rims. (6+1) Michellin brand tires :385/65R22.5, |
| Flooring | Steel Checkered 3mm plate 3MM |
| The trailer shall be designed to carry 1× 40-ft loaded container,1× 20ft loaded container ,and 2×20ft empty containers . |
|
| Each side shall have removable pillars with locks (60x80x4x1500mm) 10 pieces on each side (60x80x4x1500mm) |
|
| 10 pieces of hooks or ratchets for cargo belts shall also be provided on each side. |
|
| Trailer Front Wall |
The carrier shall be infront of the trailer wall,the pillars shall be back of trailer wall.the carrier shall be equipped with step ladders on both sides. |
| The front wall shall be 1520mm high and shall be provided with appropriate carrier for trailer accessories | |
| Side Pillars Carrier |
Suitable carrier or tray with lockable door cover for keeping the removable side pillars shall be provided on the side of the trailer to storing the removable side pillars. |
| Cargo Restraint |
Twenty (20) pieces removable side pillars and Two (2) pieces ratchet type cargo belts (2,000 kg x 10,000 mm). Two (2) pices cargo chain which come along with type 3 tons. |
| Paints and Anti-corrosion |
All beams,plates and structural frames shall be cleaned by sand blasting then treated with anti-rust primer before anti-corrosion paint or body coat will be applied.The trailer shall be guaranteed for five (5) years against corrosion. |
| Standard Accessories | Reinforced rear bumper with rubber dumper |
| Two (2) six (6)kg. ABC type fire extinguisher with holder | |
| Spare tire carrier for 2 tires | |
| Driver tool box,Kitchen box and food box( food box provide by customer by themselves) | |
| Two (2) pieces tire chokes. | |
| Steel mudguard and tail lights grill | |
| Plastic water tank with faucet-200 liters | |
| Warranty Provisions | Suspensions and chassis structures must be free from fissure and deformity for one year beginning form the receiving date of the trailer |
| Shipment of Trailers |
Schedule of Deliveries (The earliest delivery time that would be favorable to SAPTCO shall be given high consideration.) |
| Quantity of trailers to be delivered per delivery schedule ( To be specified ) |
Packaging & Delivery:
Packaging Details: Naked, maxed before shippment
Delivery Detail: 25 days after diposit
Our tanker trailers production line :
Contact us :
Looking forward to your any consults !
){kind=link}