Topless Construction Building 8t Flattop Tower Crane with Jib 55m

• Customization: Available
• Certification: CE, ISO9001, Eac
• Condition: New
• Model NO.: PT80(P5020/5515)
• Maximum Lifting Height: 100-150m
• Maximum Lifting Weight: 8t
• Installation: Jack-Up
• Moving Type: Fixed
• Type: Top-Slewing Crane
• Rated Lifting Moment: 800kN.M
• Jib Length: 55m
• Tip Load: 1.3t
• Max Lifting Load: 8
• Transport Package: Container
• Trademark: SINOHENG
• Origin: China
• Production Capacity: 760

Product Description

Product Description

Characteristics of Flat-top tower crane:

1. Safe and convenient. Reduce the dismounting requirements, lower weight, low mounting height, dismount each mast at a time in the air, save the labor cost, safety and fast.
2. Suitable for crossover work of the cranes. Without the tower cap and pull rod, the safety will be increased when there need the crossover work.
3.  Suitable for the special requirement about the height. Such as airport nearby, tunnel, workshop ,and the construction site with high-tension cable.
4. Suitable for the construction site that has the requirement about the crane boom. It can be used as internal climbing crane in the high-rise buildings, irregular roof or small areas.
5. The crane boom is good applicability. High-usage, the design of the topless tower crane boom is easy for realizing the serialization and standardization.

 

Model	PT80(5513)
Basic Information	Rated Lifting Moment(kN.m)	800
	Jib length(m)	55
	Tip Load(t)	1.3
	Max lifting load	8
	Free standing height(m)	46
	Max height with attachment(m)	150
Details Configuration
Lifting System	Motor	Power(kw)	24/24/5
	Reducer	center distance	450mm
	Lifting Speed(m/min)	(a=2) 80/40	(a=4) 40/20
	Steel Wire Rope	Specification	6*19-12.5-zs
Slewing System	Motor	Power(kw)	3.7*2
	Reducer	Output Torque(N.m)	10000
		Reducer Type	XX4-80
	Slewing Speed	(r/min)	0~0.64
	slewing abutment	Specification	HSW.32.1220
Luffing System	Motor	Power(kw)	2.2/3.3
	Luffing Speed	(m/min)	20/40
	Steel Wire Rope	Specification	6*1-8-zs
Jacking System	Jacking speed	(m/min)	0.6
	Motor	Power(kw)	5.5
	Diameter of cylinder	(mm)	φ125/φ90
Other Accessories	working pressure	20Mpa
	Main Cable	Specification	3*10mm2+2
	Main Electical Used Schneider	Stainless Steel Caninets	Space cragt Cabin

Our products

Our service